
Tile is beautiful, durable, and is generally easy to clean, but clean the grout? It was a different story. Because the dye is usually mild and porous composition, not susceptible to staining. In the tile or mudroom entry, dirt and dust is a common cause, while in the kitchen, spills more likely to blame. In the bathroom, homeowners have to contend with mold and mildew.
Fortunately, it is possible to clean up and restore the tile cleaning gold coast you use with common household products and a little elbow grease.
The following suggestions for cleaning grout from the mildest to the strongest listed.
- Scrub dirty grout using plain warm water and a stiff brush.
If you do not already have a brush for the job, most home centers and hardware stores carry a selection of options specifically for the purpose, to clean your tile and grout. All you have to do is to simply spray warm water on the grout lines and scrub in a circular motion, then let dry.
- Pour over hydrogen peroxide.
moderate stains may require you to use hydrogen peroxide, which is available in most pharmacies. You can use the product directly, or apply a paste of baking soda and hydrogen peroxide.
- Apply a paste of baking soda and spray with vinegar.
Add even more cleaning power to the mixtures, cover grout lines with a paste made of baking soda and water, then spray on the vinegar solution listed above. Once the mixture stops foaming, scrub with a brush and rinse with clear water.
- Steam cleans the worst spots grout.
Steam cleaners can be an effective and respectful environment method of cleaning grout or many hard surfaces throughout the house. Bissell, Oreck, and Hoover steam cleaners all make for residential use.
- Apply bleach oxygen for 15 minutes.
For more stubborn stains and dirty grout, use oxygen bleach as a cleaner for grout. You will find this cleanser in stores and usually sold in powder form; best-selling brands include OxiClean, Clorox and OxiMagic Biokleen Oxygen Bleach Plus. Whatever product you clean grout, make sure the area is well ventilated, and carefully read and follow the manufacturer’s instructions for application. In general, you want to leave the job of oxygen bleach solution for 10 or 15 minutes before rinsing. Always rinse with clear water so that dirt does not resettle in the grout lines.
- Spray with equal parts of vinegar and warm water for a few minutes.
Heavier dirt and mild stains, turn to vinegar, a good old standby for many household chores. Fill a spray bottle with a half and half solution of vinegar and warm water. Spray on the grout, let it stand for five minutes, then scrub with a stiff brush.
- Use bleach sparingly on grout.
Bleach (and commercial cleaners containing bleach) can be used sparingly in the extreme clean grout. One of my go-to products, when all else fails, is Clorox Clean-Up Spray (available on Amazon). Before applying, rinse all efforts, especially over the vinegar, because traces of vinegar mixed with bleach emit highly toxic chlorine gas in the air. And do not make a routine: Long-term use caustic cleaning products erode the grout, so that these products must be used on a limited basis. Checkout worksafe.qld.gov.au for safety tips when cleaning your tile and grout.
How do you clean grout without scrubbing?
Here are some ideas for tiles and grout cleaning without rubbing. Clean the slurry coating with hot water to remove dirt and grime. Make a cleaning solution, having a 50-50 mixture of vinegar and water in the spray bottle. Spray this solution in the grout and rest for about 5-10 min.
To keep your grout clean and free of stains, it’s a good idea to spray with vinegar and rub down once a week. It can also clean grout with alcohol to prevent the formation of mold in the bay. A few spritzes and cleaning one week can save a lot of time and effort cleaning, preserving the great appearance of your home.
If you need help in getting your tile and grout cleaned fast, you can contact us at floor tile cleaners newcastle or tile & grout cleaning services geelong.